Click on the image to check the artwork
1 Drilling depth (NQ drill rod) Approximately 500m
2 Spindle speed Forward 57； 99； 157； 217； 270； 470； 742； 1024
Reverse 45； 212 r/min
3 Spindle Maximum torque 3200 N·m
4 Spindle max pulling force 60 KN
5 Spindle stroke 600 mm
6 Max. lifting force of the hoist with single rope 30 KN
7 Inner diameter of the spindle 96 mm
8 Retraction distance 305 mm
Retraction distance for the host drill rig 330 mm
Retraction distance for both drill rig and tower 160 mm
10 Oil pump SCB32/12 double gear pump
11
Power unit engine power 30 KW 1500 r/min
electric motor 22KW 1470 r/min
12 Crawler maximum walking speed 1.2 km/h
13 Crawler Climbing capacity 25°, no more than 25 °
14 Tracked Ground pressure 0.042 MPa
15 Rig height 8 m
16 Hook load of the tower 29.4 kN
17 Max.static load of crown block beam 58.8 kN
18 Quantity of pulley 2
19 Angle range of tower ups and downs 0°～ 90°
20 Rig Dimensions ( tower horizontal position ) (L*W*H) 4450×2166×3080 mm
21 Total weight about 5500 kg
XY-2BL Crawler Mounted Core Integrate Drilling Rig